Construction Renovation

How To Drill Into Concrete

Believe it or not, drilling a hole into concrete can add many things to the place such as paintings, water pipes, bulbs and lightings. The entire process is simple as you just need the required tools to get this done. Of course, you must know how to use the tools or you might damage your property.

Here are the 2 steps of concrete drilling:

Rent a Good Hammer Drill

If you’re not going to use the drill often, it would be better to rent one. It’s better to go for a hammer drill because a normal one makes the job slower. Since it’s the primary material in this process, it’s alright to invest a lot for a hammer from a well-known brand as long as you’re getting premium quality in return. It would be a big benefit if the hammer has outstanding features such as comfortable grip, depth stop and speed setting.

Before using it, you must read the user’s manual so you’ll be familiar with the tool. It’s a must to follow all safety instructions including wearing safety goggles to prevent concrete chips from getting into your eyes. Gloves are also needed to protect your hands from the hot bits.

Drilling the Concrete

The first thing to do would be to mark the drilling spot so you know where you’ll point the hammer drill. The next thing you must do is to make a small hole. You must point your hammer drill to the spot then apply it using a low speed. The purpose of this is guiding you for the real hole. After that, place the drill in the small hole and exert more power. You just have to remember to pull the drill back every 10 seconds to pull the dust out.

If you’re not certain you’ll be able to perform all those tasks, it would be better to leave it to the professionals. You’re going to be guaranteed fast service when you hire concrete drilling experts from Melbourne. It’s only going to be a matter of time before your plan for the hole will carry on.