Home Maintenance

Tips For Tile Regrouting

Doing some grout work is mandatory for faded, dirty or mould-covered shower tiles. Half the time, these tiles are difficult to clean, even when you use the strongest industrial detergent. When this happens, it may be time to consider a more effective solution. Here are the quick and easy steps to succeed:

• Perform a thorough inspection before you do anything on your tile floor. Wrong execution is likely to cause further damage, so you should do an inspection first to find out what problems exist. This will give you an idea of the magnitude of the renovation and the materials you need.

• Remove the grout between shower tiles. Remove unwanted particles before anything else. In case any form of mould is present, use a mould cleaner with a solution, mildew remover lye diluted with water. The ideal depth of the gap between the tiles should be at least 1/8 inch deep.

• Shortly after finishing, wash off the tile with a wet wipe to get the remaining materials. If the old-fashioned tile is not completely cleaned, use isopropyl alcohol to clean it. It is also possible to eliminate this by using a reliable grout bag or a chiselled, hardened tiles mother.

• Extend the grout in the spaces between the tiles. The compression can be premixed or alternatively dried. Make sure they match the manufacturer’s instructions for mixing and using them.

If you try these ideas at home, you are sure to get your tiles looking and smelling like new again. Although almost all types of the tile regrouting are likely to work, you can try a latex-based formula that is much less susceptible to breakage and often resistant to water and moisture. If you don’t have the time to do the tile regrouting work, you can call the experts of tile regrouting Brisbane. Their skilled team of professionals is competitive and cost effective. There is no need to remove tiles when they do the service because it can fix leaks using top quality products which have been tried over 20 years.